ABBEY LANE LABORATORY, L.L.C.

MOLD TEST KITS, MOLD IDENTIFICATION AND CONTAMINATION CONTROL

  • E-mail us with questions or comments
  • Voicemail: 541-929-5984
  • Land Mail: P.O. Box 1665 Philomath, OR 97370 USA
  • Specimen Delivery: 24407 Abbey Lane, Philomath, OR 97370


  • Abbey Lane Laboratory
    SERVICES:

    Mold Test Kits

    ASTM, Mil Std. and other  Standard Testing Protocols

    Building contamination

    Identification of molds and other fungi

    Sterile and semi-sterile Manufacturing & Food Technology


    SITE LINKS

    Home Page

    Company Profile

    Prices

    Our Procedures

    Instructions for Mailing

    Turn-Around Time



    OTHER LINKS

    Molds, Stachybotrys and your health

    Mycological Society of America

    EPA Molds & Air Quality Info



    PRICES

    ASTM & MIL-SPEC TESTING:
    Cost of testing is between $1800 - $2000 for a set of ten tests, with a charge of $250 per additional unit to be tested.  Testing prices may vary depending on any additional testing protocols requested outside of the ASTM test procedures.

    TEST KITS
    All test come with sampling instructions; Data Sheet; and a report returned to you on organisms you recover.

    Level-1, Combination kit: $200 Two tape-lift samplers for surface sampling; 4 snap-lock Petri plates containing sterile growth medium; sterile swabs

    Level-2, Combination kit: $150: One tape-lift sampler for surface sampling; 4 snap-lock Petri plates containing sterile growth medium; sterile swabs.

    Level-3, Air and swab testing: $125: 2 snap-lock Petri plates containing sterile growth medium; gloves; sterile swabs.

    Level-4, Surface sampling, $100. 2 tape-lift samplers; sampling instructions.

    Level-5. Special Arrangements: We can work with you to provide discounts on large numbers of test kits or variations in the composition of a home test kit. Please contact us directly and we can work together to give you a balance of testing methods, amounts and your cost structure.

    BULK OR BUILDING MATERIAL SAMPLES

    $100/Substrate sample preparation.

    $100/organism in aggregate

    Regardless of the number of samples received, we only charge you once for organisms identified. Thus, if you send 5 samples, and we find the same mold in all five samples, we would charge you $100 for the identification and $500 for sample preparation.

    IDENTIFICATION OF FUNGI FROM CULTURES:

    Molds: $100/organism/substrate.

    Watermolds: $150/culture.

    Other fungi: Price to be negotiated.

    ISOLATIONS:

    We can isolate fungi from any substrate you submit for subsequent identification. Identifications are to species unless the organism will not sporulate in culture. We can also mail you samplers on which you may collect material for identification. 

    ISOLATION OF UNKNOWNS

    Processing fee of $100/substrate, $10/subculture from each substrate. Subsequent identification of subcultures follows standard fee schedule for organisms.